|
|||
|
|
|
|
Foster Products- Product Overview
- Think Safety First
- Fluid Compatibility Guide
- Install/Maintain Couplers ►
- Profile Drawings
- One Way Shutoff Series ►
- Safety Vent Series ►
- Non-Std. Interchange ►
- Straight Through Series
- Two Way Shut-off Series ►
- Mold/Die Series ►
- Hose/Accessories ►
- Hose Fittings ►
- Misc. ►
ZSi Products- Product Overview
- Product Animations
- Beta Clamps►
- Cushion Clamps►
- Cushion Strips►
- Insulation Clamps►
- Insulation Saddles►
- Gamma Pads►
- Loop/Hose/Cable Clamps►
- Rooftop Supports►
- Z-Clamps►
- Beam Clamps►
- Wesanco Cut Strut►
- Spring Steel Supports►
Resources- Event Calendar
Our Brands- ZSi-Inc.
- Wesanco/Strut
- Rep. Login
No items in your cartFoster Products
ZSi Products
(Interchange with Tru-Flate Series 10)
Plugs (TF Series 1/4")
Female Thread
Plugs (TF Series 1/4")
Male Thread
Plugs (TF Series 1/4")
Hose Stem (Requires Hose Clamps)
Plugs (TF Series 1/4")
Push-On Hose Stem
Plugs (TF Series 1/4")
Reusable Hose Clamp
ID x OD
Female Thread
Male Thread
Hose Stem (Requires Hose Clamps)
Push-On Hose Stem
Reusable Hose Clamp
ID x OD
Female Thread
Hose Stem (Requires Hose Clamps)
Male Thread
Female Thread
Male Thread
Hose Stem (Requires Hose Clamps)
Push-On Hose Stem
Reusable Hose Clamp
ID x OD
TF Series Couplers (pneumatic) up to 300 psi connect with Tru-Flate design, also known as the automotive interchange. They have manual sleeves and are single shut off quick couplings. The steel tubular valve delivers high air flow with minimal pressure drop. Couplers and Nipples are available in a wide range of sizes and materials for use in a variety of applications with air or fluid.
Type: One Way Shut-Off
Rated Pressure: 300 PSIG
Operation: Automatic Push to Connect;
Sizes: Sizes: 1/4", 3/8", (1/2" use Industrial Interchange version)
Features:
- Developed for the automotive industry
- High flow valves with minimal pressure drop
- Integral Sleeve guard helps prevent accidental disconnect
- Grip-ring sleeve version has a larger knurled diameter to provide easy operation when gloves are worn
Applications:
- Air compressors, Pneumatic Tools
- Grease guns, Paint applicators
As various manufacturers started to offer quick detachable couplers, most of them entered the market with their own design, which was different from their competitors. There was very little interchangeability from one brand to another. Efforts to correct this problem began about 50 years ago with the creation of a military specification (MIL-C-4109) for One Way Shut-Off couplers. This design is now the most commonly used and is referred to as the standard industrial interchange. Two Way Shut-Off designs are also being standardized, based on ISO dimensions. However, there are still many different Two Way designs, most of which vary by application. Although there is no organizational standard governing the design of Straight-Thru couplers, a standard industrial design (Foster Series FST) has developed from usage. Foster offers couplers that will interchange with many of these non-standard designs as shown below.
One Way Shut-Off Couplers
- F180 Miniature Series Interchange with Hansen 180
- LN Series Interchange with Lincoln Long Nose
- SHD Series Interchange with Schrader Standard & Heavy Duty
- FRL Series Interchange with Hansen 2RL & 3RL
- O60 Series Interchange with Hansen 600 Series
- A70 Series Interchange with Hansen 700 Series
- 210 Series Interchange with ARO 210 Series
- 310 Series Interchange with ARO 310 Series
- TF3 Series Interchange with Tru-Flate Series
- ISO A Series Conforms with ISO 7241-1, Series A
Two Way Shut-Off Couplers
- FF Series Flush Face
- FHK Series Compatible with ISO 7241-1, Series B
- FH & FIH Series Interchange with Snap-Tite H Series
Straight Through Couplers
- FST Series Straight-Thru Industrial Interchange
Mold/Die Couplers
- FJT Series Interchange with DME, Jiffy-Tite, Jiffy-Matic, Parker Moldmate