Foster FJT Series couplers are designed to connect coolant lines to plastic molds and die casting dies. FJT Series plugs are mounted in the mold. They can be threaded directly into the mold coolant ports or recessed into the mold for a flush surface during storage. Sockets have hose stems, either standard hose or "Push-on" type, for direct connection to the coolant line going to the manifold. Seal compound is silicone for use with water, ethylene glycol, or air.
Type:Straight-Thru, One Way or Two Way
Interchangeability:DME Jiffy-Tite and Jiffy-Matic and Parker Moldmate couplers
Operation: - Socket sleeve must be manually retracted to connect and disconnect
Temperature:-65° to 425° F.
Rated Pressure:200 PSIG
Options: BL- Locks manual socket against accidental disconnect. To connect, align ball with slot. After connection, rotate sleeve to lock. To disconnect, realign ball with slot and retract sleeve. To order, prefix BL to socket catalog number.